How to add key with VVDI MLB Tool?
Xhorse VVDI MLB TOOL XDMLB0 Key Programmer Product Highlights:
Ultra capable in reading, writing and calculating
No points required when using VVDI MLB specialized key
The following two scenarios require points deduction for MLB calculations:
1. When adding keys, points will be deducted to calculate the IMMO data.
2. When doing key recovery, the second-hand key has been initialized and unlocked, but does not have the IMMO data of the key. You need to deduct a few points to collect and calculate the IMMO data of the key before it can be restored.
Notice:
For the Original key
Unlocked uninitialized with id Can generate key directly to learn key
Unlocked and uninitialized without id Allows to change the id once.
Unlocked and initialized Can restore key to unlocked and uninitialized state by calculating anti-theft data No id
Locked and initialized original key cannot be unlocked.
Xhorse VVDI MLB TOOL Functions:
1. Work with VVDI2 / Key Tool Plus Pad for MLB immobilizer key learning, Support VVDI MLB special submachine, Support original key
VVDI2 requires VV-05 MQB and VV-02 VAG IMMO5 license activated
2.Excel in key Adding for MLB Models
Support adding keys for Audi, Porsche, Volkswagen, Lamborghini, Bentley, and other MLB vehicle models
3. No Need to Remove the Chip
Key data calculation requires only the disassembly of the key shell, with no need to remove the chip. Integrated with a 22k reader, it enables wireless key reading and writing without shell removal.
4. Wireless Key Generation for Ultimate Convenience
Generate original dealership keys and Xhorse specialized keys wirelessly.
5. Immo Detection Made Easy
Built-in Immo detection module supports wireless key recognition
6. Compatibility with Original Keys and Xhorse Specialized Keys
Support brand-new original keys (uninitiaIized/initiaIized) and can verify the status of the original keys. Support VVDI MLB specialized keys for unlimited reuse.
7. Rewrite Uninitialized Key IDs
Support rewriting uninitialized original key IDs.
8. No Need for On-Vehicle Data Collection
Simply collect key data, upload for calculation, and obtain Immo data without needing to access the vehicle.
How to add key with VVDI MLB Tool?
1.VVDI MLB Tool MLB Wiring Diagrams (Type 1-Type 6):
No need to remove chip. But need to remove two capacitors (100nF) and solder cable to original key according to different color as diagram.
Type 1 (Audi/Lamborghini)
Type 2 (Audi/Lamborghini)
Type 3 (Audi/Bentley)
Type 4 (Porsche)
Type 5 (Porsche)
Type 6 (VW)
2.There are main three steps for operation.
Step 1: Identify key
Place the key in the device identification area for identification.
Step 2: Collect key data
Open the original MLB key, connect the original car key PCB as shown in the diagram, click Collect Key data button after connection. The server takes approximately 10 seconds to calculate.
Save the calculation data when it completed.
Step 3: Make dealer key
Load the saved data above and generate dealer keys.
After the key is made successfully, use Xhorse VVDI2 programmer and VVDI Key Tool Plus Pad to learn key.